FDM

Flexible Ducting Malaysia manufactures a wide range of hoses for almost every application. The following represents just a small sample of our capabilities. For information on our other quality products, please Contact Us.

FDM Products

Stretch flexible hose made with PVC or blends, single ply, lightweight construction with vinyl coated spring steel wire helix manufactured at FDM.

Stretch Hose

  • PVC or blends available, single ply, lightweight construction with vinyl coated spring steel wire helix.
  • Unique directional ID wall lap configuration maintains good airflow as hose is compressed. This construction also provides superior anti-clogging performance.
  • Also available in RF, Lightweight (approximately 27% less than Standard SR),
Outward Convolute, Low Voltage, and High Voltage constructions.
  • Excellent retraction "memory"
  • Stretch ratio ranges from 3:1 to 6:1
  • Ideal for vacuum applications where storage space is a factor.
  • Diameters range from 3/4" to 2"
  • Lengths up to 10'
Vac-U-Flex CVLD lightweight flexible hose with molded cuff end, single ply construction with coated wire helix

Vac-U-Flex CVLD

  • Single ply construction with coated wire helix available in varying thicknesses - and materials.
  • Molded cuffs can be designed to meet customer application.
  • A lightweight, flexible hose that offers good air flow, along with excellent helix-to-cover adhesion.
  • Available in a wide range of colors.
  • Diameters up to 1-1/2"
  • Lengths up to 50'

Hi-Tech Medical Products

Flex - 5 clear flexible hoses with molded 22mm cuff ends, universal, reusable tube for most CPAP machines

Flex-5

  • 19mm tube with 22mm cuffs
  • Lightweight reusable CPAP tube with excellent flex life
  • Smooth interior and a corrugated exterior for excellent flexibility and unrestricted internal flow
  • Universal tube, made to fit most standard CPAP machines
  • Can be sterilized with ethylene oxide
  • Temp. Range: -30°F to 160°F (-34.44°C to 71.11°C)
  • Diameters: 0.748" to 0.866" (18.9992mm to 21.9964mm)
  • Standard Length: 72"
Flex-Lite clear flexible hoses with molded 22mm cuff ends, ultra-light, small diameter CPAP tube with excellent flex life

Flex-Lite

  • 15mm tube with 22mm cuffs
  • Ultra-light, small diameter CPAP tube with excellent flex life
  • Can be sterilized with ethylene oxide
  • Fits all CPAP masks and machines with 22mm connectors*
  • Temp. Range: -30°F to 160°F (-34.44°C to 71.11°C)
  • Diameters: 0.591" to 0.866" (15.0114mm to 21.9964mm)
  • Standard Length: 72". Custom lengths available upon request

*Flex-Lite only intended for CPAP machines configured for 15mm tubes.

Type 888 white flexible plastic hoses available in integral, silicone or molded cuffs, excellent temperature range and chemical resistance made at FDM.

Type 888

  • Steam autoclavable up to 275°F (135ºC)
  • Available with integral cuffs, silicone cuffs (22mm) or over molded cuffs
  • Excellent temperature range and chemical resistance
  • Can be sterilized with ethylene oxide, radiation or pasteurization (275ºF)
  • Smooth interior for unrestricted flow, corrugated exterior for flexibility
  • Tough, lightweight alternative to heavy, expensive silicone hoses
  • Temp. Range: to 275°F (-17.78°C to 135°C)
  • Diameters: 0.394" to 2" (10.0076mm to 50.8mm)
  • Standard Lengths: 4" to 120"
Type 777 clear flexible hoses with applications that include smoke evacuation, anesthesia and respirator therapy. Supplied with integral cuffs - very strong yet lightweight.

Type 777

  • Very strong, yet lightweight
  • Excellent clarity and odorless
  • Smooth interior for unrestricted flow, making it the reduced sound level choice for disposable medical applications
  • Applications include smoke evacuation, anesthesia and respirator therapy
  • Can be sterilized with ethylene oxide
  • Even in the tightest bends, laminar airflow is not compromised
  • Supplied with integral cuffs for simple connection to equipment fittings
  • Temp. Range: -30°F to 160°F (-34.44°C to 71.11°C)
  • Diameters: 0.394" to 2" (10.0076mm to 50.8mm)
  • Standard Lengths: 4" to 120"
Type 999 clear flexible hoses for laser smoke evacuation equipment and disposable applications. Available with integral cuffs

Type 999

  • Smooth interior
  • Capable of handling high velocity airflow with minimal noise and friction loss
  • Will not compromise flow even in the tightest of bends
  • Best choice for laser smoke evacuation equipment and disposal applications
  • Can be sterilized with radiation or ethylene oxide
  • Available with integral cuffs for simple connection to medical equipment
  • Temp. Range: -30°F to 130°F (-34.44°C to 54.44°C)
  • Diameters: 0.394" to 2" (10.0076mm to 50.8mm)
  • Standard Lengths: 4" to 120"
Type 222 flexible hoses with corrugated exterior and smooth interior with 22m molded cuffs available

Type 222

  • Smooth interior for excellent flow characteristics
  • Good chemical resistance
  • Available with 22mm molded cuffs
  • Temp. Range: -20°F to 160°F (-28.89°C to 71.11°C)
  • Diameters: 0.59" to 2" (14.986mm to 50.8mm)
  • Standard Lengths: 4" to 120"
Type 252 flexible hoses for respiratory/inhalation and sleep apnea applications, superior tensile strength, available with 22mm molded cuffs manufactured at FDM.

Type 252

  • Excellent choice for respiratory/inhalation therapy and sleep apnea applications where extra crush resistance is required
  • Superior tensile strength
  • Very flexible and will not collapse in the tightest bends
  • Available with 22mm molded cuffs
  • Temp. Range: -20°F to 180°F (-28.89°C to 82.22°C)
  • Diameters: 0.59" to 2" (14.986mm to 50.8mm)
  • Standard Lengths: 4" to 120"

Hi-Tech Duravent Products

2PN - Two ply polyester-neoprene coated duct, Non-metallic helix available for non-conductive use

2PN

  • Two ply polyester-neoprene coated
  • Longer life for positive or negative pressure movement of light particles or materials
  • UL94V-0 listed
  • Conductive compound available for static discharge
  • Non-metallic helix available for non-conductive use
  • Available as 1PN (one-ply) for temporary service and lighter applications, consult factory for minimums
  • Temp. Range: -40°F to 250°F (-40°C to 121.11°C)
  • Diameters: 2" to 24" (50.8mm – 609.6mm)
  • Standard Lengths: 25'
ARH Thermoplastic rubber duct with an external polypropylene wear strip - diameter up to 10 inches - ideal for dust collection, fume exhaust and conduit applications from Flexible Ducts Malaysia.

ARH

  • Thermoplastic rubber with an external polypropylene wearstrip
  • Larger diameters available up to 10"
  • Smooth interior for easy flow
  • Excellent crush resistance
  • External helix allows for rough use in applications where the hose will be dragged
  • Ideal for dust collection, fume exhaust and conduit applications
  • Available in white, consult us on minimums and price
  • Materials used in ARH-White are FDA acceptable
  • Available with integral cuffs
  • Temp. Range: -60°F to 275°F (-51.11°C to 135°C)
  • Diameters: 0.75" to 10" (19.05mm to 254mm)
  • Standard Lengths: 25', 50'
CVD Blue or Clear Polyvinylchloride (PVC) hose reinforced with a wire helix. Ideal for fume removal, dust collection and ventilation applications.

CVD Blue or Clear

  • Polyvinylchloride (PVC) reinforced with a wire helix
  • Economical alternative to most ducts and sacrifices nothing in performance
  • Great flexibility with tight bending characteristics
  • Ideal for fume removal, dust collection and ventilation applications
  • Materials used in CVD-Clear are FDA acceptable
  • Available in metric diameters
  • Also available in a lighter wall (CVD.020), consult factory for minimums
  • Temp. Range: -20°F to 180°F (-28.89°C to 82.22°C)
  • Diameters: 1" to 18" (25.4mm to 457.2mm)
  • Standard Lengths: 25', 50'
Flex-Flyte L-1 Two-ply neoprene coated fiberglass lightweight and flexible ducting. Great for low pressure applications.

Flex-Flyte L-1

  • Lightweight and flexible
  • UL94V-0 listed
  • Great for low-pressure applications
  • Handles air and fumes at low pressures and moderately high temperatures
  • Two-ply neoprene coated fiberglass
  • Not recommended for continuous flexing, liquids or abrasives
  • Available as U-1 (one-ply) for lower pressure applications
  • Temp. Range: -65°F to 300°F (-53.89°C to 148.89°C)
  • Diameters: .75" to 12" (19.05mm to 304.8mm)
  • Standard Lengths: 12'. Non-standard lengths and cuffs available, please consult factory.
  • Standard Length for 3/4" is 10'
Flex-Flyte L-9 Two-ply silicone coated fiberglass duct with a helically wound spring wire imbedded between two-plies. Lightweight and easy to install and non-kinking.

Flex-Flyte L-9

  • Two-ply silicone coated fiberglass hose with a helically wound spring wire imbedded between two-plies
  • Standard duct for high temperature air flow and fume removal
  • Internal ply provides a smooth interior for maximum air flow and minimum friction loss
  • UV and weather resistant
  • Light weight, easy to install and non-kinking
  • Great for handling air, dust, fumes and light powder
  • Not recommended for liquids or abrasive materials
  • Available as U-9 (one-ply) for lower pressure applications
  • Non-standard lengths and cuffs available, please consult factory
  • Temp. Range: -75°F to 500°F (-59.44°C to 260°C)
  • Diameters: .75" to 12" (19.05mm to 304.8mm)
  • Standard Lengths: 12'. Non-standard lengths and cuffs available, please consult factory.
  • Standard Length for 3/4" is 10'
HTR Polypropylene reinforced with a polypropylene rod helix duct, crush resistant, lightweight and flexible.

HTR

  • Economical
  • Lightweight, very flexible and good flex fatigue resistance
  • Excellent compressibility
  • Crush resistant
  • No glues, solvents, cements or adhesives are used in construction
  • Meets FMVSS 302 flame standards
  • Polypropylene reinforced with a polypropylene rod helix
  • Great choice for heater/defroster hose, air conditioning and ventilation
  • Temp. Range: -40°F to 225°F (-40°C to 107.22°C)
  • Diameters: 1" to 8" (25.4mm to 203.2mm)
  • Standard Lengths: 25', 50'
RFH Thermoplastic rubber duct reinforced with a wire helix. No cements, glues or adhesives used in manufacturing process.

RFH

  • Thermoplastic rubber reinforced with a wire helix
  • Most versatile general-purpose hose available today
  • No cements, glues or adhesives are used in the manufacturing process
  • Can handle applications with a wide temperature range
  • Superior chemical resistance
  • Good abrasion resistance
  • Available in metric diameters
  • Available with cuffed end finishes
  • Temp. Range: -60°F to 275°F (-51.11°C to 135°C)
  • Diameters: 1.25" to 24" (31.75mm to 609.6mm)
  • Standard Lengths: 25', 50'. Available up to 100' lengths
RFH Plus Thermoplastic rubber duct with coated polyester fabric reinforced with a wire helix - tremendous versatility.

RFH-Plus

  • Thermoplastic rubber with coated polyester fabric reinforced with a wire helix
  • Improved puncture, moisture and tear resistance
  • Higher temperature range than neoprene/fabric hoses
  • Tremendous versatility
  • Available with cuffed end finishes
  • Temp. Range: -60°F to 275°F (-51.11°C to 135°C)
  • Diameters: 2" to 20" (50.8mm to 508mm)
  • Standard Lengths: 25', 50'
RFH-W Thermoplastic rubber reinforced with a wire helix and an external polypropylene wear strip molecularly bonded to the hose wall so it will not delaminate.

RFH-W

  • Thermoplastic rubber reinforced with a wire helix and an external polypropylene wearstrip
  • Great abrasion resistance
  • Ideal for applications where dragging is involved
  • The wearstrip helps prevents premature wear-through
  • RFH-W wearstrip is molecularly bonded to the hose wall so it will not delaminate
  • Available in a heavier wall, consult us on sizes
  • Available with cuffed end finishes
  • Other wearstrip colors available. Consult us on minimums
  • Temp. Range: -60°F to 275°F (-51.11°C to 135°C)
  • Diameters: 2" to 24" (50.8mm to 609.6mm)
  • Standard Lengths: 25', 50'
SDH Specially formulated thermoplastic urethane reinforced with a plastic helix and copper grounding wire. Ideal for clean rooms, powder and plastic pellet transfer.

SDH

  • Specially formulated thermoplastic urethane reinforced with a plastic helix and copper grounding wire
  • Smooth interior
  • Possesses inherent static dissipation
  • Does not outgas and is free of fillers, halogens and surface oils
  • Excellent flexibility, abrasion resistance and clarity
  • Ideal for clean rooms, powder and plastic pellet transfer
  • Materials are FDA acceptable
  • Screw-on cuffs available
  • Temp. Range: -20°F to 180°F (-28.29°C to 82.22°C)
  • Diameters: .75" to 4" (19.05mm to 101.6mm)
  • 3/4" and 1" diameters are without static wire
  • 1.25", 1.5", 1.75", 2", 3", 4" diameters are with static wire
  • Standard Lengths: 25', 50'
Super-Vac-U-Flex High strength fiber reinforced PVC hose cover bonded to coated spring steel wire helix, ideal for bilge pumps and bilge ventilation.

Super Vac-U-Flex

  • High strength fiber reinforced PVC hose cover bonded to coated spring steel wire helix
  • Offers flexibility for easy handling and installation
  • Great for industrial and commercial vacuum cleaners and ventilating or cooling industrial machinery
  • Ideal for bilge pumps and bilge ventilation
  • Other colors and lengths available with 3000' minimum order
  • Temp. Range: -20°F to 150°F (-28.29°C to 65.56°C)
  • Diameters: 1.25" to 4" (31.75mm to 101.6mm)
  • Standard Lengths: 3" and 4" diameters - 25'. Other diameters - 50'
UFD black or clear Thermoplastic polyurethane duct reinforced with a wire helix - excellent flex fatigue resistance. Handles higher pressure and vacuums than standard ducting.

UFD Black, Clear

  • Thermoplastic polyurethane reinforced with a wire helix
  • Superior abrasion resistance
  • Excellent flex fatigue resistance
  • Allows users to locate blockages
  • Handles higher pressure and vacuums than standard ducting
  • Materials used in UFD-Clear are FDA acceptable
  • Available with cuffed end finishes
  • Available in metric diameters, please consult us on minimums
  • Temp. Range: -65°F to 200°F (-53.89°C to 93.33°C)
  • Diameters: 2" to 18" (50.8mm to 457.2mm)
  • Standard Lengths: 25', 50'
UFD-AP All thermoplastic polyurethane hose reinforced with a plastic helix and smooth interior, lightweight and highly flexible.

UFD-AP

  • All thermoplastic polyurethane hose reinforced with a plastic helix
  • Smooth interior
  • Lightweight and highly flexible
  • Suitable replacement for thicker walled EPDM hoses
  • The clarity of the hose allows the user to check for blockages
  • Helix provides added durability in applications where the hose is being dragged
  • Temp. Range: -40°F to 200°F (-40°C to 93.33°C)
  • Diameters: 1.5" to 8" (38.1mm to 203.2mm)
  • Standard Lengths: 25', 50'
UFD-SD Specially formulated Static Dissipative thermoplastic polyurethane reinforced with a wire helix. Ideal for clean rooms, grain dust collection, powder and flour handling.

UFD-SD

  • Specially formulated Static Dissipative thermoplastic polyurethane reinforced with a wire helix
  • Excellent flexibility, abrasion resistance and clarity
  • Possesses inherent static dissipation
  • Does not outgas and is free of fillers, halogens and surface oils
  • Ideal for clean rooms, grain dust collection, powder and flour handling
  • Materials used are FDA acceptable
  • Temp. Range: 20°F to 200°F (-28.89°C to 93.33°C)
  • Diameters: 2" to 12" (50.8mm to 304.8mm)
  • Standard Lengths: 25', 50'
UFD .045 clear Heavy walled Thermoplastic polyurethane reinforced with a wire helix. Excellent for leaf and lawn collection and other severe service applications.

UFD.045 Clear

  • Heavy walled Thermoplastic polyurethane reinforced with a wire helix
  • Superior abrasion resistance
  • The color of the hose allows for the user to locate blockages
  • Excellent for leaf and lawn collection and other severe service applications
  • Materials used in UFD.045 Clear are FDA acceptable
  • Available with cuffed end finishes
  • Temp. Range: 65°F to 200°F (-53.89°C to 93.33°C)
  • Diameters: 2" to 18" (50.8mm to 457.2mm)
  • Standard Lengths: 25', 50'
  • Available in 10' lengths during leaf collection season
Vac-U-Flex TPE Industrial weight, specially formulated two-ply thermoplastic elastomer material; coated spring steel helix encapsulated and bonded to hose jacket. Resistant to most acids, alkalis and solvents.

Vac-U-Flex TPE

  • Industrial weight, specially formulated two-ply thermoplastic elastomer material; coated spring steel helix encapsulated and bonded to hose jacket
  • Offers great flexibility and smooth interior
  • Rubber-like characteristics
  • Exceptional toughness
  • Resistant to most acids, alkalis and solvents
  • Pitch, wall thickness, and length variations available with 3000' minimum order
  • Temp. Range: 40°F to 250°F (-40°C to 121.11°C)
  • Diameters: .75" to 6" (19.05mm to 152.4mm)
  • Standard Lengths: 25'
Vac-U-Flex TPU Flexible, smooth interior 100% clear two-ply thermoplastic polyurethane material; coated spring steel helix encapsulated and bonded to hose jacket. Excellent chemical, oil, and fungus resistance.

Vac-U-Flex TPU

  • Flexible, smooth interior 100% clear two-ply thermoplastic polyurethane material; coated spring steel helix encapsulated and bonded to hose jacket
  • Offers high abrasion, puncture, and tear resistance
  • Excellent chemical, oil, and fungus resistance
  • Low temperature flexibility
  • Color, pitch, wall thickness and length variations available with 3000' minimum order
  • Temp. Range: 40°F to 200°F (-40°C to 93.33°C)
  • Diameters: .75" to 6" (19.05mm to 152.4mm)
  • Standard Lengths: 25'